Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 21)

2-9
IM04L41B01-65EN
1
2
3
4
Index
Viewing and Creating Setup Data
Graph
Divisions
Select the number of scale divisions.
Bar Graph
Select the reference position of the bar graph. Selecting [Center] when the bar graph is
vertical produces no effect. It is set back to [Normal] when the data are checked.
Scale
When using scale display on the trend screen, select the position to display the scale.
For details related to divisions, bar graph, and scale, see section 5.12 in the DX100P/
DX200P User’s Manual.
Partial Expanded Display
ON/OFF
Set whether or not to use the partial expanded display for each channel.
Note
The partial expansion settings take effect when the partial expansion function is set to [Use] in
the [Aux] section of the [System Mode] tab.
Position (%)
Set the position to which the boundary value is to be moved. The range is from 1 to 99%.
Boundary
Set the boundary value within the display span.
The conditions used to set the boundary vary depending on the measurement and
computation channels as follows:
• Measurement channel
When SCALE and SQRT are not used: Span L < boundary < span U
When SCALE and SQRT are used:
Scale L < boundary < scale U
• Computation channel
Span L < boundary < span U
Display Color
You can select the display color of each channel from 16 colors.
Clicking the color area displays the [Color] dialog box. Select a color and click [OK].
2.3 Setting the Measurement Channels