Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 46)

2-34
IM04L41B01-65EN
2.8 Saving the Setup Data
Saving the Setup Data
Saves the setup data b specifying the save destination and file name.
2. The [Save As] dialog box opens.
3. Set the destination and
file name and click here
1. Select [File] - [Save As].
Note
• You cannot save the data using the same file name as the file in the save destination
(overwriting the file is not allowed).
• You cannot edit the setup data after saving it. If you wish to change the settings further, start
from “Starting Editing” in section 2.2.