Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 17)

2-5
IM04L41B01-65EN
1
2
3
4
Index
Viewing and Creating Setup Data
2.2 Configuration
This operation is for creating new setup data (excluding the login information and batch
system settings).
Starting Editing
This operation enables editing setup data.
2. The [Edit Data]
dialog box opens.
1. Select [Edit] -
[Edit Configuration].
3. Click [OK] to start editing
Note
When you start editing, the login information and batch system settings are not displayed.
To initialize the setup data without changing the system configuration, proceed to
“Initializing the Setup Data.” To change the system configuration, proceed to “Changing
the System Configuration.”
Initializing the Setup Data
This operation is for initializing the setup data without changing the system configuration.
2. The [initialize]
dialog box opens.
1. Select [Setting] - [Initialize].
3. Click [OK] to execute
the initialization.
Changing the System Configuration
2. The [System Configuration]
dialog box opens.
3. Configure the system.
4. Click here.
5. The [System configuration] dialog box opens.
1. Select [System] - [System Configuration].
6. Click here.
The setup data is initialized.