Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 39)

2-27
IM04L41B01-65EN
1
2
3
4
Index
Viewing and Creating Setup Data
FTP Connection
Specify the primary and secondary file transfer destinations (FTP servers).
2. Select the primary or secondary tab.
1. Select this tab.
Select the
file transfer
destination
• Server Name
Set the FTP server name using up to 64 alphanumeric characters. You can also
specify the IP address. In this case, DNS is not necessary.
• Port Number
Set the port number of the destination FTP server in the range from 1 to 65535. The
default setting is [21].
• Login Name, Password, Account
Set the login name (up to 32 characters), the password (up to 32 characters), and the
account (the ID number, up to 32 characters) to use when accessing the FTP server.
• PASV
When using the DXP behind a firewall that requires the PASV mode, turn this mode
[On].
• Initial Path
Set the destination directory for the file transfer using up to 64 alphanumeric
characters.
Example: /home/data
• Disp & Event Data
Display data files and event data files are automatically transferred to the specified
destination at specified intervals.
• Report
A Report file is automatically transferred to the specified destination when it is created.
• Snapshot
A screen image data file is automatically transferred to the specified destination when
a snapshot is executed.
2.6 Configuring the System Mode