Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 94)

Chapter 4 Installation and Wiring
4-15
(2) Insert the CF Card in the CF Card Slot, until the eject button is pushed forward.
(3) Close the cover. (As shown.)
4.3.2 Removing the CF Card
Simply reverse the steps shown in the previous “Inserting CF Card” explanation. Prior to pressing the eject
button to remove the CF Card, confirm that the CF Card Access LED is turned OFF.
4.3.3 CF Card Handling
The CF Card has a data overwrite limit of approximately 100000 times. Therefore, be sure to back up all CF
Card data regularly to another storage media. (100000 times assumes the overwriting of 500KB of data in
DOS format.) Two methods are available for backing up data. After using either method (1) or method (2), use
your personal computer to save your data to the CF Card.
(1) If your PC is equipped with a PC Card Slot
To view CF Card data on a personal computer, first insert the CF Card into a CF Card Adapter
(GP077-CFAD10), then insert the adaptor in the PC card slot of the PC.
(2) If your PC is NOT equipped with a PC Card slot
Use a commercially available PC Card Reader, or a CF Card Reader.
• Make sure that the CF Card cover is closed when accessing the CF Card.
Eject Button