Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 30
Chapter 2 Part Names and Functions
2-7
H: DIP Switches
* When the unit turns ON with DIP switch 2 ON, the unit starts in transfer mode. Under normal operating
conditions, set to OFF.
DIP
Switches
Function
ON
OFF
Note
1
Start up from CF Card
Enabled
Disabled
CF Card with startup
data required
2*
Forced transfer mode
Forced Transfer
Mode: ON
Forced Transfer
Mode: OFF
-
3
Reserved
-
-
Constantly OFF
4
Simulate cover closed,
allowing card to be read
even if cover open
Enabled
Disabled
Used when CF Card
cover is damaged
1
2
3
4
ON
This manual is related to the following products:
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"