Package contents – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 11
10
Package Contents
The following items are included in the ST unit’s package. Before using the ST, please check that all items listed here
are present.
This unit has been carefully packed, with special attention to quality. However, should you find anything damaged or
missing, please contact your local ST distributor immediately.
ST Unit: 1
English and Japanese Installation
Guides (One of each)
Warning/Caution Information: 1
Installation Gasket: 1
(Attached to the ST unit)
Installation Fasteners: 4 per set
DC Power Connector: 1
· ST-3200/3300/3400 series
(Attached to the ST unit
for ST-3200/3300 series)
· ST-3500 series
(DC type only)
(Attached to the ST unit)
USB Cable Clamp: 1 set
· ST-3200/3400 series
Holder: 1, Cover: 1
· ST-3300 series
Holder: 1, Clamp: 1
· ST-3500 series
Holder: 1, Clamp: 1
Installation
Guide
Warning/
Caution
Information
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"