Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 20)

Chapter 1 Overview
1-5
‹ Edit Mode Peripherals
*1 For supported models, refer to Pro-face’s support site “Otasuke Pro!” ( http://www.pro-face.com/otasuke/ ) .
You can connect to this site by clicking the GP-Pro EX’s [Help (H)] menu - [Connect to Support Site-
“Otasuke Pro!” (C)] command.
*2 The RS-232C Isolation Unit does not correspond to RS-422/485 (2 wire) communication.
*3 The RS-232C Isolation Unit does not correspond to Serial Multilink communication.
*4 For details regarding connection methods, be sure to read “Transferring Projects and Data” under
“„COM Transfer Connections” in the GP-Pro EX Reference Manual.
*5 Certain types and models of PCs cannot be used.
ST Interfaces
(1) USB Host Interface
(2) CF Card Interface
(Only ST-3400/3500 series are supported.)
SEE GP-Pro EX Reference Manual
USB Transfer Cable
CA3-USBCB-01
USB Port
Personal Computer
(Commercial type)
*5
Screen Editor
Software
GP-Pro EX
ST Unit
CF Card CA3-CFCALL/128MB-01
CA3-CFCALL/256MB-01
CA3-CFCALL/512MB-01
CA6-CFCALL/1GB-01
CA8-CFCALL/2GB-01
CF Card Adapter
GP077-CFAD10
PCMCIA Slot
(2)
(1)
USB Memory Storage *1
(Commercial type)
USB-Serial (RS-232C)
Conversion Cable
CA6-USB232-01 RS-232C Cable *4
(Prepared by user)
Modem *1
(Commercial type)
Serial Port
Telephone lines