2 periodic check points, 2 periodic check points -3, Periodic check points – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 102: 3 5.2 periodic check points
Chapter 5 Maintenance
5-3
5.2
Periodic Check Points
To keep your ST unit in its best condition, please inspect the following points periodically.
ST Operation Environment
Is the operating temperature within the allowable range (0ºC to 50ºC)?
Is the operating humidity within the specified range (10%RH to 90%RH, dry bulb temperature of 39ºC or
less)?
Is the operating atmosphere free of corrosive gasses?
When using the ST unit inside a panel, the ambient environment refers to the interior of the panel.
Electrical Specifications
Is the input voltage appropriate?
AC85 to 265V 50/60Hz
DC19.2 to 28.8V
Related Items
Are all power cords and cables connected properly? Have any become loose?
Are all mounting brackets holding the unit securely?
Are there many scratches or traces of dirt on the installation gasket?
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"