Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 17)

ST3000 Series Hardware Manual
1-2
1.1 System Design
The following diagram illustrates the standard range of items that can be connected to ST3000 Series units.
For host controller (PLC, etc.) connection information, refer to the “GP-Pro EX Device/PLC Connection
Manual”.
‹ ST RUN Mode Peripherals
ST Unit
(3)
(1)
(2)
(3)
(6)
(6)
(6)
(6)
(10)
Host Controller
PLC etc.
USB-Serial (RS-232C) Conversion Cable
CA6-USB232-01
USB-to-IEEE1284
Conversion Cable
(Commercial type)
USB Cable
FP-US00 or
commercial type
USB Hub
(Commercial type)
CA3-CFCALL/128MB-01
CA3-CFCALL/256MB-01
CA3-CFCALL/512MB-01
CA6-CFCALL/1GB-01
CA8-CFCALL/2GB-01
Bar-Code Reader *1
(Commercial type)
Bar-Code Reader *1
(Commercial type)
Printer *1
(Commercial type)
USB Memory Storage *1
(Commercial type)
CF Card
RS-232C Cable
CA3-CBL232/5M-01
Mitsubishi PLC Q-Series Link Cable
CA3-CBLLNKMQ-01
Omron PLC SYSMAC Link Cable
CA3-CBLSYS-01
Mitsubishi PLC Q-Series Connection Cable
CA3-CBLQ-01
Siemens TTY Converter Cable
CA6-CBLTTY/5M-01
USB Front Cable
CA5-USBEXT-01
Bar-Code Reader *1
(Commercial type)