1 usb mass storage device configuration – IEI Integration AFL2-W15A-N270_W15A-L325 v1.01 User Manual
Page 90

AFL2-W15A-N270/L325 Panel PC
Page 78
Î
Disabled
Legacy USB support disabled
Î
Enabled D
EFAULT
Legacy USB support enabled
Î
Auto
Legacy USB support disabled if no USB devices are
connected
Î
USB2.0 Controller Mode [HiSpeed]
Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller.
Î
FullSpeed
The controller is capable of operating at 12 Mb/s
Î
HiSpeed D
EFAULT
The controller is capable of operating at 480 Mb/s
3.3.7.1 USB Mass Storage Device Configuration
Use the USB Mass Storage Device Configuration menu (BIOS Menu 13) to configure
USB mass storage class devices.
BIOS SETUP UTILITY
Main
Advanced
PCIPNP
Boot
Security
Chipset
Power
Exit
USB Mass Storage Device Configuration
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
USB Mass Storage Reset Delay
[20 Sec]
Device #1 M-SysT5 Dell Memory Key 5.04
Emulation Type
[Auto]
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10
Save and Exit
ESC Exit
V02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 13: USB Mass Storage Device Configuration
Î
USB Mass Storage Reset Delay [20 Sec]
Use the USB Mass Storage Reset Delay option to set the number of seconds POST
waits for the USB mass storage device after the start unit command.