IEI Integration AFL2-W15A-N270_W15A-L325 v1.01 - Manual (Page 61)

AFL2-W15A-N270/L325 Panel PC
Page 49
Frequency 125 KHz, ASK
Interface Wiegand 26 bits, ABA Track2, Serial TTL
9600bps, 8N1
Resolution > 8cm
Transponders Supported Read only
Dimensions L90.00x W22.5xH24.00 mm with cover
Table 2-15: RFID Module Specifications for EM Models
2.11.2 RFID Module for MF Model
Table 2-15 lists the specifications of the RFID module installed in the
AFL2-W15A-N270/L325 MF models.
Model MF222
Power Requirements 5VDC+/-5% at 100 mA
Frequency 13.56 MHz
Interface Wiegand 26 bits, ABA Track2, RS-232, Serial TTL
9600bps, 8N1
Card Type Mifare MF1 standard cards for 1024/4096 bytes
and Mifare UltraLight cards of EEPROM
size 512 bits for ISO14443A
Reading Distance 2~5 cm
Resolution > 8cm
Transponders Supported Read only (for unique serial number/unique
identifier)
Dimensions L90.00x W22.5xH24.00 mm with cover
Table 2-16: RFID Module Specifications for MF Models
2.11.3 Serial Port (COM) Settings
The COM port settings have to be set correctly to enable the communication with the
built-in RFID reader. Please follow the information below to setup the COM port settings.
Step 1: Launch the Hyper Terminal from the Start menu (Start Æ Programs Æ
Accessories Æ Communications Æ HyperTerminal).