IEI Integration NANO-CV-D25501_N26001 - Manual (Page 73)

NANO-CV-D25501/N26001 EPIC SBC
Page 58
Figure 4-11: Audio Kit Cable Connection
Step 3: Connect the audio devices. Connect one speaker to the line-in audio jack, one
speaker to the line-out audio jack and a microphone to the mic-in audio jack.
4.6.3 Keyboard/Mouse Connector
The NANO-CV-D25501/N26001 is shipped with a keyboard/mouse Y-cable connector.
The keyboard/mouse Y-cable connector connects to a keyboard/mouse connector on the
NANO-CV-D25501/N26001 and branches into two cables that are each connected to a
PS/2 connector, one for a mouse and one for a keyboard. To connect the keyboard/mouse
Y-cable connector please follow the steps below.
Step 1: Locate the connector. The location of the keyboard/mouse Y-cable connector
is shown in Chapter 3.
Step 2: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the NANO-CV-D25501/N26001 keyboard/mouse connector. See Figure 4-12.