Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 90)

Chapter 6: Searching CATC Traces PETracer EML User Manual
82
LeCroy Corporation
6.4 Go to Time
To position a specific time at the top of the screen:
Step 1 Select Go to Time from the Search menu. A pop-up menu prompts you
for the time in Seconds or Clocks.
Step 2 Enter the time and format (seconds or clocks).
Step 3 Click Go.
6.5 Go To Marker
Use this operation to go directly to a specific packet that has been marked with a unique
marker by the Set Marker operation.
To go to a marker:
Step 1 Select Go To Marker from the Search Menu.
Step 2 Select the marker you want from the fly-out menu. 
Alternatively, select All Markers to display the All Markers window, then
select a marker and click Goto.
The packet you want appears at the top of the screen. Marked packets have a red bar on
the left edge.