Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 236)

Chapter 13: Configuration Space PETracer EML User Manual
228
LeCroy Corporation
Note: The Configuration Space View, from the Reports menu, reflects any added
structures (see “Configuration Space View” on page 161).
After you click OK, the center column displays the Capability Structure View, with the
register layout. You can modify the selected Capability Structure by selecting registers
and editing in binary or hex. The toolbar allows you to select Binary or Hexadecimal for
editing.
Alternatively, after selecting a register, you can modify the register in the Field View in the
right column.
The Field View allows you to override field attributes. By default, attributes are assigned
according to the specification. The available options are:
• RO: Read Only
• RW: Read-Write
• RW1C: Write-1-to-Clear
Note: See Appendix A “Configuration Space Decoding” on page 175.