Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 197)

PETracer EML User Manual Chapter 10: Traffic Generation
LeCroy Corporation
189
10.2 Creating a Traffic Generation File
There are four ways to create PETrainer™ traffic generation script file:
• Export an existing PETracer™ trace to a PETrainer script file
• Save an existing PETrainer script to a new file
• Select File > New to create a new and empty script file that contains no text.
• Create an empty file using an OS shell (with .peg extension) and open it with
PETracer software.
Exporting a CATC Trace to a Traffic Generation File
A simple way to create a script file is to open a CATC Trace and then to export the
CATC Trace data to a generation file:
Step 1 Open a CATC Trace file.
Step 2 Select File > Export > to Generator File Format.
Step 3 Select the desired options from the File Export dialog box:
Direction: Selects the direction of the traffic to be exported.
From and To: Selects a range for exporting. You can export all or part of the CATC Trace.
Do not export hidden packets: Ignores any packets hidden through the various hide
options.
Do not export Idle packets: Excludes Idles from the export.