Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 215)

PETracer EML User Manual Chapter 10: Traffic Generation
LeCroy Corporation
207
Parameter Values Default Comment
Automatically handle
Configuration Read and
Write TLP transactions Yes
No No If set, automatically handles Configuration Read and Write
TLP transactions.
For Configuration Read transaction, Completion TLP
contains the data read from the internal Configuration
Space according to specified register address.
For Configuration Write transaction, internal Configuration
Space is updated at the address with the data taken from
Configuration Write TLP, and Configuration Write
Completion is returned.
This option enables Read and Write access to 4 KB
configuration space.
Automatically handle
Memory and IO Read and
Write TLP transactions Yes
No No If set, automatically handles Memory and IO Read and
Write TLP transactions.
For Memory and IO Read transactions, Completion TLP
contains the data read from the internal Memory/IO
Address Space according to specified address.
For Memory and IO Write transactions, internal Memory/IO
Address Space is updated at the address with the data
taken from TLP.
Enable Memory and IO
Completions with
Unsupported Request
(UR) Status Yes
No No If set, enables Unsupported Request (UR) status for
Memory/IO completions.
AutoMemIoCompletion must be set to enable UR
completions.
Enable Memory and IO
Completions with
Completer Abort (CA)
Status Yes
No No If set, enables Completer Abort (CA) status for Memory/IO
completions.
AutoMemIoCompletion must be set to enable CA
completions.
Set Data Poisoned Bit for
All Memory and IO
Completions Yes
No No If set, all Memory/IO completions have Poisoned bit set.