Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 39)

PETracer EML User Manual Chapter 3: Installation
LeCroy Corporation
31
3.4 Networking an Analyzer
PETracer™ has a networking capability that allows users to run an Analyzer remotely
over an IP-based LAN. Using the Network browse dialog, you can locate and connect to
other PC hosts on the LAN, which, in turn, are connected to Analyzers. Through this
connection, you can remotely control an Analyzer.
Setup for IP LAN Use
In order to connect to a remote Analyzer, the Analyzer must be attached to a PC that is
on the LAN. This PC must have PETracer installed.