Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 25)

PETracer EML User Manual Chapter 2: Hardware Description
LeCroy Corporation
17
PETrainer EML Modules
(g) Activity LED: On the Transmit module, this LED illuminates when linkup is
established between the Exerciser and the DUT. On the Receive module, this LED
illuminates when there is traffic on the link.
(h) Cable Setup LED: On the Transmit module, this LED illuminates when an
connection is established between the Exerciser and host emulator or device
emulator.
(i) Receive Probe Data Connector: Receives traffic from DUT.
(j) To Analyzer: Transmits generated traffic from Exerciser to the Receive channel on
a PETracer EML Analyzer. This is an optional connection for users adding a
PETracer EML Analyzer to their setup.
(k) Transmit Probe Data Connector: Sends generated traffic from Exerciser to DUT.
(l) To Analyzer: Sends traffic received from DUT on the Transmit channel on a
PETracer EML Analyzer. This is an optional connection for users adding a
PETracer EML Analyzer to their setup.