Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 61)

PETracer EML User Manual Chapter 4: Software Overview
LeCroy Corporation
53
Generate Menu
Report Menu
Report Menu operations are only available when you are working with a CATC Trace file.
Connect Initializes the link between PETrainer and the device under test.
Disconnect Disconnects the link between PETrainer and the device under test.
Write Address Space Reads PETrainer internal memory used for address space mapping.
Read Address Space Loads PETrainer internal memory used for address space mapping.
File Information Displays the brief information about the file contents and describes the conditions of
the file’s recording (Recording Options, hardware information, and so on).
Error Summary Displays an error summary of the current CATC Trace file and allows you to go to a
specific packet, and save the error file to a uniquely named file.
Traffic Summary Details the number and types of packets that were transferred during the recording.
You can hide, save, send, text, print, and view.
Bus Utilization Opens a window with graphs of bus usage for the open CATC Trace.
Link Tracker Opens a window for displaying a detailed chronological view of traffic. The window
provides view and navigation options.
Data Flow Opens the Data Flow Window, providing a tabular view of transactions and their
payload.
Trace Navigator Shows the Navigator bar for navigating a CATC Trace. Shows a snapshot of the
recording and allows you to adjust the memory area for the view.
LTSSM Flow Graph Shows a state diagram of bus activity. Also allows you to navigate through
the LTSSM, based on the current recording.
Packet Header Opens the Packet Header bar, showing the Packet Header information as it would be
veiwed in the specification.
Packet Data/View Data Opens the Data Window for the current packet, with the options: Hide, Save,
Hexadecimal, ASCII, Decimal, Binary, MSB Format, LSB Format, Big Endian, and
Little Endian. Format Line allows you to enter the number of bytes, words, or dwords
per line.
Configuration Space Presents a list of Configuration Spaces. Clicking an item displays the selected
Configuration Space in a Configuration Table format.