Teledyne LeCroy SierraNet M168 User Manual Ver.1.40 - Manual (Page 66)

Teledyne LeCroy Trigger and Filter Settings in Easy Mode
64 SierraNet M168 User Manual
Run an Example Analysis Project
To run an example project:
1. Select File > Open.
For Windows XP use ‐ ROOT:\Program Files\LeCroy\Ethernet Protocol Suite
For Windows Server2003 (32 bit), Windows Server 2012 (64 bit), Windows 7 or
Windows 8 ‐ ROOT:\Users\Public\Public Documents\LeCroy\Ethernet Protocol Suite
2. Locate example analysis projects by looking in the Examples folder. Traces are
available and Traces. Click Data > Examples > Traces.
3. In the Traces folder, choose an example *.get file and click Open to display the
example project dialog.
Figure 2.38: Open File Dialog
4. Click the Open button to execute the pre‐defined trace.
5. After the project runs, you see an analyzer trace capture display (see
Figure 2.39 on
page 65 ).