Teledyne LeCroy SierraNet M168 User Manual Ver.1.40 - Manual (Page 40)

Teledyne LeCroy Software Menus and Toolbar
38 SierraNet M168 User Manual
Traffic Summary icon. See “Traffic Summary View” on page 44.
Data View icon. See “Data View” on page 44.
Export to Wireshark icon. Click to export trace to Wireshark and
launch the Wireshark application. Wireshark must be installed
on the PC. Wireshark is a free application available at
www.wireshark.org. (see
Figure 2.6 on page 40 )
Displays the Trace information dialog. (see “Trace Information”
on page 45 ).
Find icon. You can search for specific Triggers and specify the
From, Domain, Direction and Logic. See
“Find” on page 169
Find Next icon. Searches for the next instance.
Find Previous icon. Searches for the previous instance.
Go to icon. Click to locate cursors or specific packets: Timestamp,
X Position, Y Position, Event, Begin, and End. See
Figure 2.17 on
page 48 .
Go to Trigger icon. Click to go to the trigger point in the trace.
See
Figure 2.17 on page 48 .
Go to Marker icon. Click to go to a specific Marker. See “Markers”
on page 153 .
Zoom in icon. Searches for the previous instance.
Zoom out icon. Searches for the previous instance.
Filter icon. Click to open the filter dialog. See “Filtering” on
page 164 .
Ports icon. Click to select a port. See “Ports” on page 160 .
Idles icon. Click to show/hide idles in a trace.
External Trigger Setting icon. Click to open the External trig
Setting dialog. See
“External Trigger” on page 81 .