Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 53)

WaveJet 300A Remote Control Manual
917976 Rev A
53
Trigger TVSET
Command/Query
DESCRIPTION The TVSET command sets field sequence, field number and
line number for TV trigger.
The TVSET query returns the currently set field
sequence, field number, and line number.
COMMAND SYNTAX TVSET ,,
:= {1, 2, 4, 8} This specifies the field sequence
to 1, 2, 4 or 8.
:= 0, 1 to 8 (Specify 0 to selects "Any Fields")
:= 1 to 263 (When TVSTD is NTSC and is
odd number)
:= 1 to 262 (When TVSTD is NTSC and
is even number)
:= 1 to 313 (When TVSTD is PAL and is
odd number)
:= 314 to 625 (When TVSTD is PAL and
is even number)
:= 0 (Specify 0 to selects "Any Lines")
QUERY SYNTAX TVSET?
RESPONSE FORMAT ,,
REMARKS TVSET command reports device-specific error (DDE) when
TTYP is not TV.
Line number selection is automatically set as follows.
NTSC：263/262
PAL：625
Trigger TVSTD
Command/Query
DESCRIPTION The TVSTD command selects the TV standard for TV trigger
(TTYP=TV).
The TVSTD? query returns the currently selected TV
standard.
COMMAND SYNTAX TVSTD
:= {NTSC, PAL, CUSTOM}
QUERY SYNTAX TVSTD?
RESPONSE FORMAT
REMARKS TVSTD command reports device-specific error (DDE) when
TTYP is not TV.