Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 42)

WaveJet 300A Series
42
917976 Rev A
Trigger TCOUNT
Command/Query
DESCRIPTION The TCOUNT command defines the number of pulses for
pulse count trigger (TTYP=COUNT).
The TCOUNT? query returns the currently set number of
pulses for pulse count trigger.
COMMAND SYNTAX TCOUNT
:= 1 to 9999
QUERY SYNTAX TCOUNT?
RESPONSE FORMAT
REMARKS TCOUNT command reports device-specific error (DDE) when
TTYP is not COUNT.
Trigger TCPL
Command/Query
DESCRIPTION The TCPL command defines the trigger coupling mode. The
TCPL? query returns the defined trigger coupling.
COMMAND SYNTAX TCPL
:={AC, DC, HF, LF}
QUERY SYNTAX TCPL?
RESPONSE FORMAT
The current trigger coupling is identified in
.
REMARKS When TSRC is LINE or TTYP is TV, TCPL command reports
device-specific error (DDE) and TCPL? query returns DC.