Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 24)

WaveJet 300A Series
24
917976 Rev A
acquired
11/11 Waveform =
Unavailable
Ch2 waveform
data
availability
12/- [Channel3] Category name
for Channel 3
vertical
information
This item and
followed three items
are appear only when
the scope has
channel 3.
(WJ354/334/324/314)
13/- Volts/div = 100mV Ch3 Volts/div
when the last
waveform was
acquired Probe ratio is not
considered.
14/- Offset = 150mV Ch3 offset when
the last
waveform was
acquired
Probe ratio is not
considered.
15/- Waveform =
Unavailable
Ch3 waveform
data
availability
16/- [Channel4] Category name
for Channel 4
vertical
information
This item and
followed three items
are appear only when
the scope has
channel 4.
(WJ354/334/324/314)
17/- Volts/div = 100mV Ch4 Volts/div
when the last
waveform was
acquired Probe ratio is not
considered.
18/- Offset = 150mV Ch4 offset when
the last
waveform was
acquired Probe ratio is not
considered.
19/- Waveform =
Unavailable
Ch4 waveform
data
availability
20/12 [Horizontal] Category name
for horizontal
information
21/13 Time/div = 500ms Time/div when
the last
waveform was
acquired.
22/14 Delay =
+0.000000000000s
Trigger delay
(Trigger
position) when
the last
waveform was
acquired