Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 34)

WaveJet 300A Series
34
917976 Rev A
MEASURE MDSP
Command/Query
DESCRIPTION The MDSP command turns on or off parameter
measurements. When the parameter measurements are
turned on, the measurement results are displayed on the
screen and are also available for readout by MSRA?,
MSRB, MSRC? and MSRD? queries.
COMMAND SYNTAX MDSP
:={ON, OFF}
QUERY SYNTAX MDSP?
RESPONSE FORMAT
REMARKS MDSP is set to OFF when XYDS is XY or XYTRG.
MEASURE MINMAX
Command/Query
DESCRIPTION The MINMAX command enables or disables Min/Max of
Measure.
The MINMAX? query reads the currently Min/Max of
Measure status.
COMMAND SYNTAX MINMAX
:={ON, OFF}
QUERY SYNTAX MINMAX?
RESPONSE FORMAT
Horizontal MLEN
Command/Query
DESCRIPTION The MLEN command sets the maximum memory length. The
MLEN? query returns the current maximum memory length.
COMMAND SYNTAX MLEN
:={500, 1K, 10K, 100K, 500K} (Time/div is
20s/div or faster)
:={1K, 10K, 100K, 500K} (Time/div is 50s/div)
:={1K} (XYDS is XY)
QUERY SYNTAX MLEN?
RESPONSE FORMAT
REMARKS Max memory length is fixed at 1K when XYDS is XY.