Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 45)

WaveJet 300A Remote Control Manual
917976 Rev A
45
Trigger TLVL
Command/Query
DESCRIPTION The TLVL command sets the trigger level of the channel
set by the trigger source. If a value beyond the setting
range is specified, it is rounded to the maximum or
minimum value.
The TLVL? query returns the trigger level of the channel
specified in the trigger source.
COMMAND SYNTAX TLVL
:= The
format is basically used, and the suffix is also valid.
For the setting range and rounding rules, see
"Remarks".
Note: The TLVL command can be used without the suffix,
V.
The setting range and resolution of the
is changed according to vertical sensitivity.
(Trigger level range) = (-5div to +5div)
(Trigger level resolution) = (1div / 50)
QUERY SYNTAX TLVL?
RESPONSE FORMAT
:= The format
is used. The currently set trigger level is input here.
REMARKS When TSRC is LINE or TTYP is TV, TLVL command reports
device-specific error (DDE) and TLVL? query returns
+0.00000E+00.