Teledyne LeCroy WavePro 7 Zi_Zi-A - Manual (Page 99)

Getting Started Manual
922137-00 Rev A 91
OR
If you selected Math On Parameters, touch inside the Math
Operator data entry field and select a math function from the pop-
up menu.
5. In the mini-dialog to the right of the main setup dialog, touch the
Gate tab to narrow the span of measurement - as covered in the
Measure Gate topic (available in the online help files).
6. Touch the Accept tab to define parameter values to be used in the
measurement - as covered in the Qualified Parameters topic
(available in the online help files).