Teledyne LeCroy WavePro 7 Zi_Zi-A - Manual (Page 111)

Getting Started Manual
922137-00 Rev A 103
Note: Turning off a trace for which trend data is being collected resets the
trend. If it is necessary to continue data collection for the trend, first create
a zoom trace of the channel trace (before turning off the channel trace).
Creating a Track View
1. In the menu bar, touch Measure → Measure Setup....
2. Touch a parameter tab Px and its corresponding dialog is shown.
3. Now, on the dialog, touch inside the Source1 data entry field and
select an input waveform from the pop-up menu.
4. Touch inside the Measure data entry field and select a parameter
from the pop-up menu.
5. Touch the Track button at the bottom of the dialog.
6. Now, from the Math selection for Track menu, select a math
function location (Fx) on which to store the Track display.
The Track is then shown along with its respective trace descriptor
label for the selected math function.