Teledyne LeCroy WavePro 7 Zi_Zi-A - Manual (Page 107)

Getting Started Manual
922137-00 Rev A 99
S
INGLE
P
ARAMETER
H
ISTOGRAM
S
ETUP
U
SING
M
ATH
Access the main Math dialog by selecting Math → Math Setup... on the
menu bar.
There are two ways to select your math operator during setup. They only
differ in the order of the steps.

Using the Fx Buttons on the Math Dialog - After directly touching an
Fx button on the Math dialog, the Select Math Operator pop-up is
shown.
Math functions are categorized into Basic and Special.

Using a Corresponding Fx Tab/Dialog - After directly accessing a
corresponding Fx dialog, touch the Operator control and the Select
Math Operator pop-up is shown.
Regardless of how you performed the previously described initial steps, at
this point access your corresponding Fx dialog if you want to change other
setup items as follows: