Teledyne LeCroy WavePro 7 Zi_Zi-A User Manual
Page 150
WavePro 7 Zi/Zi-A Oscilloscopes
142
922137-00 Rev A
Trigger Enabled - This function can be used as a gating function to
trigger another instrument when the oscilloscope is ready.
Trigger Out - This function can be used to trigger an external
oscilloscope.
Pass/Fail - Allows you to set a pulse duration (varied based on your
specific model, refer to datasheet specifications at
for details); generates a pulse when pass/fail
testing is active and conditions are met.
Fast Edge - Some models provide this signal output used to deskew
multiple channels. The Fast Edge connection varies based on model
and is either SMA or BNC.
C
ALIBRATION
O
UTPUT
S
IGNALS
A calibration signal can be output from the Probe Calibration Hook on the
front of the oscilloscope. The following Calibration Output Signals are
available for use:
Square Wave - You can set a Frequency value (varied based on your
specific model, refer to datasheet specifications at
for details).
DC Level - This is a reference level.
Off - This function turns off the Auxiliary Output signal.