IAI America TTA User Manual
Page 47
-47/85-
4-3-29. Output Port Status Change (24AH)
Function: Change the status of the output port specified by the output port number.
Data name
Data range (value)
Data size
[bytes]
Cumulative
bytes [bytes]
Endian Sign
extension
Unit
Description Remarks
Big Little Yes No
Command
Header '!'
1
1
Station 'XX(h)'
2
3
Message ID
'24A(h)'
3
6
Output port number
'XXXX(h)'
4
10
Change type
'X(h)'
1
11
Bit 1 to 3 (Reserved for system use) are fixed to 0.
Bit 0 (Output port ON/OFF): 0 = OFF / 1 = ON
SC 'XX(h)'
2
13
CR 0Dh
1
14
LF 0Ah
1
15
Normal
response
Header '#'
1
1
Station 'XX(h)'
2
3
Message ID
'24A(h)'
3
6
SC 'XX(h)'
2
8
CR 0Dh
1
9
LF 0Ah
1
10
Error
respon
se
Error response
format
Refer to the error
response format.
10 10
(Note 1) Add H (or h) at the end of each data expressed in hexadecimal notation. If there is no H or h at the end, the data is considered a decimal.
(Note 2) Data enclosed in single quotation marks indicates an ASCII code. Data is a hexadecimal ASCII code if (h) is added before the closing quotation mark, or a decimal ASCII code if (d) is
added before the closing quotation mark.