IAI America PCON-CFA - Manual (Page 95)

3. SCON-CA/CF
A
89
CompoNet
3.3 Interface Specifications
Item Specification
Communication protocol CompoNet specialized protocol
Communication type Remote I/O communication
Baud rate
Automatically set to the same value as the baud rate set in the
master
Communication Cable Length Refer to CompoNet specifications
Slave type Word mixed slave
Applicable note address 0 to 63 (set by controller parameter)
Communications cable
Round-type cable (JIS C3306,VCTF2 conductors)
Flat cable 1 (not sheathed)
Flat cable 2 (sheathed)
Connector
Connector recommended by OMRON is to be used.
Controller-end connector:xW7D-PB4-R (OMRON)