Gilderfluke&Co old MACs 8 bit Digital Audio System User Manual
Page 50

¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"p"
PA Zone Priorities:
In the Public Address System there are a number of different ways to assign priorities to
different PA STATIONS and PA zones. If STANDARD and ZONE PRIORITIES are both off, then all
valid PA requests (from PA STATIONS other than the top and second priority PA STATIONS for this
card) will be treated equally. Any valid request will be honored, and if more than one valid
request comes in to the same card, they will simply be mixed.
If the PA ZONE PRIORITY option is 'on', then PA zone requests with higher numbers will take
priority over those with lower numbers. Only one PA request will be honored at one time.
This feature defaults to an 'off' condition.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"q"
Loop All:
Under normal looping mode, a single spiel will repeat over and over again. If this feature is
'on', all the spiels recorded on a single card will be played in a loop. A delay, if enabled, will be
inserted between each individual spiel.
This feature defaults to an 'off' condition.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"G"
Group Assignments:
When using the serial port to control the audio system, you have the choice of using a
number of commands (start, stop, etc.) which select only a single 'group' of cards. This
command is used to select which of 12 GROUP ASSIGNMENTS this card will respond to.
Acceptable input range for GROUP ASSIGNMENTS are from 0 to F. If you need less than 12
GROUPS, you should assign the unused spaces to any of the group numbers you have already
used.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"H"
PA Zone Enables:
You can tell any card in the system to respond to up to 8 different PA zone requests. This
command is used to tell the card which zones it should respond to. Any PA requests to a zone
other than ones which has been assigned to it will be ignored by this card.
Acceptable input range for ZONE ASSIGNMENTS are from 00 to FF. If you need less than 8
ZONES, you should assign the unused spaces to any of the PA ZONE numbers to FF.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"I"
Half-Mute Zone Enables:
There are eight HALF-MUTE zones available in the Digital Audio System. This command is used
to select which of the eight, if any, you wish to use. Any HALF-MUTE request for an enabled
HALF-MUTE ZONE will half-mute this card.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"J"
Full-Mute Zone Enables:
There are eight FULL-MUTE zones available in the Digital Audio System. This command is used to
select which of the eight, if any, you wish to use. Any FULL-MUTE request for an enabled FULL-
MUTE ZONE will mute this card.
G
ILDERFLUKE
& C
o
. ¥ 205 S
OUTH
F
LOWER
S
T
. ¥ B
URBANK
, C
ALIF
. 91502-2102 ¥ 818/840-9484 ¥
FAX
818/840-9485
40