Ransburg Evolver 202 Solvent A11918-XXX - Manual (Page 85)

AA-07-01 8 0 8 0 8 0 8 0 8 0
Evolver 202 Robotic Atomizers - Parts Identification
75777-01 Single Head Spray Applicator
75777-02 Dual Head Spray Applicator
75777-03 Robot Wrist Flange
75777-XX SPRA 75777-XX SPRA 75777-XX SPRA 75777-XX SPRA 75777-XX SPRAY Y Y Y Y
APPLICA APPLICA APPLICA APPLICA APPLICAT T T T TOR COVERS OR COVERS OR COVERS OR COVERS OR COVERS
Part # Part # Part # Part # Part # Description Description Description Description Description
The 74035, Test Air Cap and Gauge Assembly, is
designed for use with a Test Station or while the
applicator is connected to the robot or reciprocator.
The test air cap is comprised of two air pressure
gauges, pressure gauge stand, special 74061-XX
air caps, and all required tubing and fittings.
The air cap has two tapped holes for small barbed
tube fittings. The fittings are located so that the
gauges connected to them will measure the actual
cap pressure of the atomization and pattern air.
Using this test cap will assure uniform atomization
and pattern quality, regardless of air supply tube
lengths from one applicator to another.
73896-01 Electrode and Air Cap 73896-01 Electrode and Air Cap 73896-01 Electrode and Air Cap 73896-01 Electrode and Air Cap 73896-01 Electrode and Air Cap
Protector
Protector Protector Protector Protector
This is a plastic cylinder that fits over the air cap
retainer. The protector keeps the electrode and
other spray head parts from being damaged during
booth cleaning and at other times when the spray
applicator is not in use.
Figure 29: 79203-00 Tool Kit Figure 29: 79203-00 Tool Kit Figure 29: 79203-00 Tool Kit Figure 29: 79203-00 Tool Kit Figure 29: 79203-00 Tool Kit
79203-00 T 79203-00 T 79203-00 T 79203-00 T 79203-00 Tool Kit ool Kit ool Kit ool Kit ool Kit
Provided with each applicator is a tool kit to aid in
the disassembly and assembly of the applicator
during servicing.
A10410-00 SPRA A10410-00 SPRA A10410-00 SPRA A10410-00 SPRA A10410-00 SPRAY Y Y Y Y HEAD HEAD HEAD HEAD HEAD
O-RING KIT O-RING KIT O-RING KIT O-RING KIT O-RING KIT
Available for purchase as a kit containing all of the
o-rings used for a single Evolver 202 spray head.
This kit can be purchased to replace o-rings.
74035-21 #65R-1 Test Cap
74035-22 #98-1 Test Cap
74035-23 #63-1 Test Cap
74035-24 #48-1 Test Cap
74035-25 #481-1 Test Cap
74035-XX TEST AIR CAPS & 74035-XX TEST AIR CAPS & 74035-XX TEST AIR CAPS & 74035-XX TEST AIR CAPS & 74035-XX TEST AIR CAPS &
GAUGE ASSEMBL
GAUGE ASSEMBL GAUGE ASSEMBL GAUGE ASSEMBL GAUGE ASSEMBLY Y Y Y Y
Part # Part # Part # Part # Part # Description Description Description Description Description
A10756-00 Valve Removal Tool
A10766-00 Valve Seat Removal Tool
76772-00 Retaining Ring Spanner
A10400-00 Seal Carrier Tool
79203-00 79203-00 79203-00 79203-00 79203-00 TOOL KIT TOOL KIT TOOL KIT TOOL KIT TOOL KIT
Part # Part # Part # Part # Part # Description Description Description Description Description
79001-04 O-Ring, Solvent Proof 1
79001-06 O-Ring, Solvent Proof 1
79001-05 O-Ring, Solvent Proof 1
A10410-00 SPRA A10410-00 SPRA A10410-00 SPRA A10410-00 SPRA A10410-00 SPRAY Y Y Y Y HEAD HEAD HEAD HEAD HEAD
O-RING KIT O-RING KIT O-RING KIT O-RING KIT O-RING KIT
Part # Part # Part # Part # Part # Description Description Description Description Description Q t y Q t y Q t y Q t y Q t y
ARCHIVE