Ransburg Evolver 202 Solvent A11918-XXX - Manual (Page 18)

AA-07-01 1 3 1 3 1 3 1 3 1 3
Evolver 202 Robotic Atomizers - Introduction
A1 A1 A1 A1 A11918-XXX EVOL 1918-XXX EVOL 1918-XXX EVOL 1918-XXX EVOL 1918-XXX EVOLVER VER VER VER VER
SPRA SPRA SPRA SPRA SPRAY Y Y Y Y APPLICA APPLICA APPLICA APPLICA APPLICAT T T T TOR OR OR OR OR
ASSEMBL ASSEMBL ASSEMBL ASSEMBL ASSEMBLY Y Y Y Y
The spray applicator assembly is designed to
connect to hollow wrist robots. A low voltage
control cable is supplied with the tubing bundle to
connect the cascade to the MicroPak power
supply.
Figure 3: Tool Center-Point Figure 3: Tool Center-Point Figure 3: Tool Center-Point Figure 3: Tool Center-Point Figure 3: Tool Center-Point
T T T T Tool Center-Point ool Center-Point ool Center-Point ool Center-Point ool Center-Point
Figure 3 shows the tool center-point information
for the four applicators. For dual head applicators,
the tool center-point is based upon the convergence
point. For the single head applicators it is based
upon a 10" target distance. The Tool Center-Point
Comparisons Table compares the tool center-
points of several automatic spray applicators.
DUAL HEAD 90° SINGLE HEAD 90°
SINGLE HEAD 60°
DUAL HEAD 60°
1414 [363.1]
6 [152.4]
1114 [285.6]
1514 [386.5]
10 [254.0]
TARGET DISTANCE
1512 [394.5]
558 [143.3]
958 [245.8]
2338 [595.2]
2318 [587.5]
10 [254.0]
TARGET DISTANCE 1112 [291.8]
1114 [287.0]
1212 [318.8]
2038 [518.4]
2018 [511.4]
CONVERGENCE POINT
CONVERGENCE POINT
ROBOT ADAPTER AND
MOUNTING PLATE
ROBOT ADAPTER AND
MOUNTING PLATE
ROBOT ADAPTER AND
MOUNTING PLATE
ROBOT ADAPTER AND
MOUNTING PLATE
ARCHIVE