Ransburg RMA Dual Purge Direct A12300 - Manual (Page 101)

A12283 - 1 01 02 02
RMA-303 Dual Purge/Direct Charge - Parts Identification
96
Robot Adapter
When ordering, use A12283-A, B, C, D as indicated by Tables A, B, C, and D . Four digits must follow
the basic part number, for example:
Tubing Bundle Length
Basic Part Number
Low Voltage
Cable Length
Fiber Optic
Cable Length
(Table A)
(Table B) † (Table C)
A12283-XXXXXXX TUBING BUNDLE ASSEMBLY
MODEL IDENTIFICATION (METRIC TUBING)
† (Table D)
NOTE: For lengths above 15 Ft., the SA1, SA0, and BRK re-
quire the next larger nominal size ID tubing. This tubing is
to be supplied by User or Distributor.
The turbine air (TA) to be supplied at maximum length of 6
Ft. long. User or Integrator must increase to minimum of
12mm OD X 10mm ID tubing after 6 Ft.
Air Tubing (Not Included)
15' Long Tubing Assembly
30' Long Tubing Assembly
No Cable
Low Voltage Cable, Quick Connect to MicroPak
Low Voltage Cable, Quick Connect to MicroPak
Low Voltage Cable, Quick Connect to MicroPak
Low Voltage Cable, Quick Connect to MicroPak
Low Voltage Cable, Quick Connect to MicroPak
TABLE B - Low Voltage Cable Length
00
01
02
03
04
05
Dash
No. Description
----
A12241-15
A12241-25
A12241-40
A12241-50
A12241-75
"B"
----
15 Ft.
25 Ft.
40 Ft.
50 Ft.
75 Ft.
"Length"
TABLE A - Tubing Bundle Length
0
1
2 --
15 Ft.
30 Ft.
Dash
No. "F" Description
Ransburg
LN-9263-08.5