Ransburg RMA Dual Purge Direct A12300 - Manual (Page 10)

INTRODUCTION
RMA-303 Dual Purge/Direct Charge - Introduction
• True dual purge capability. Spray one color
while cleaning the other paint line with no
loss of tip voltage.
• Assembly components made of durable engi-
neered resin material for optimum nmechanical
strength and solvent resistance.
• Heavy duty design ensures excellent service
life even when subjected to the quick motions
of robotic applications.
• Proven long life turbine motor capable of
speeds up to 70 krpm. (See "Specifications" in
the "Introduction" section of this manual for bell
cup speed ratings.)
• Serrated and non-serrated bell cups are avail-
able for application flexability and colo match.
All bell cups are made using Titanium material.
The 55mm bell cup is also available in aluminum.
• Aerodynamic design for ease of cleaning
external surfaces.
• 60 o angled body provides more maneuverability
and facilitates robotic programming.
• Small light weight package allows better ma-
neuverability in tight areas.
• Speed control uses reliable magnetic pickup for
fiber optic transmission of rotational speed data.
• Negligible maintenance down time. With the
quick disconnect feature, an atomizer can be
exchanged in less than 2 minutes for off-line
maintenance.
• The easily removable front and rear shrouds,
turbine assembly and the internally mounted
fluid valves, make off-line maintenance more
efficient and economical.
• Fast color changes are achieved using center
feed fluid delivery and the fluid valves provide
for simultaneous paint push out while solvent
washes the feed tube and bell cup.
• Internal and external bell wash is quick and
efficient. Externally mounted regulators control
the flow.
• Less waste to the spray booth, with the dump
valve located internally next to the feed tube.
• No external high voltage cable. The internally
mounted high voltage cascade requires only
low voltage control wiring.
• Compact high voltage control system. The
MicroPak cascade control takes only 1/4 of the
space in a 19-inch Euro rack, leaving room for
additional control modules.
• Various adapter plates available to match most
robotic mounting configurations.
• Direct charging of fluid (solventborne paint)
promotes high transfer efficiency.
• Large range of fluid tip sizes available.
• Optional repulsion ring and shroud for tighter
pattern control and less overspray.
5
FEATURES
Features which make the RMA TM -303 Dual Purge Direct Charge Robot Mounted Rotary Atomizer
advantageous for use in electrostatic applications include:
Ransburg
LN-9263-08.5
ut