E-Mon E-D5-600800-S*SPL3-V3KIT3 - Manual (Page 7)

DIN-MON™ SMART METER
7 62-0442—04
Fig. 3. Model D2 Meter
(top view with cover removed).
Verify the input voltage rating, amperage, sensor type and configuration on the meter
name plate (located on the left side of the meter) to ensure that it is suitable for the
intended electrical service. For example, the meter labeled for 120/208V service
MUST NOT be installed on service feeds of 277/480V and vice versa. Verify that the
meter’s current sensors are sized suitably for the load to be monitored.
Fig. 4. Model D5 Meter with Ethernet
(top view with cover removed).
Fig. 5. Model D5 Meter with LonWorks
(top view with cover removed).