Aastra Telecom SIP 480I - Manual (Page 99)

Advanced Network Settings
41-001129-00 Rev 09, Release 1.4.1 4-43
Configuring the IP Phones
Configuring the IP Phones
IP Phone UI
Step Action
1 For 9112i/9133i:
Press
I
on the phone to enter the Options List.
For 480i/480i CT:
Press
% on the phone to enter the Options List.
2 Select SIP Settings.
3 Select Proxy Server (or Proxy IP for 480i/480i CT) and enter an IP address or fully qualified host
name for the SIP proxy server.
4 Select Proxy Port and enter a port for accessing the SIP proxy server.
5 Select Registrar Server (or Registrar IP for 480i/480i CT) and enter an IP address or fully qualified
host name for the SIP registrar server. A global value of 0.0.0.0 disables registration. However, the
phone is still active and you can dial using username@ip address of the phone.
If the Registrar IP address is set to 0.0.0.0 for a per-line basis (i.e, line 1, line 2, etc.), then the
register request is not sent, the "No Service" message does not display, and the message waiting
indicator (MWI) does not come on.
6 Select Registrar Port and enter a port number for accessing the SIP registrar server.
7 Select Register and press Change to set Register to "Yes" (enable) or "No" (disable).
This parameter enables/disables the IP phone to register on the network.
8 Select User Name to enter the user name in the name field of the SIP URI for the IP phone, and for
registering the phone at the registrar.
9 Select Display Name to enter the name used in the display name field of the "From SIP" header
field.
10 Select Screen Name to enter the name that displays on the idle screen.
11 Select Auth Name to enter the authorization name used in the username field of the Authorization
header field of the SIP REGISTER request.
12 Select Password to enter the password used to register the IP phone with the SIP proxy.
13 Press Done to save the changes.
14 Select Phone Status.
15 Select Restart Phone and press Restart to reboot the phone for the VLAN features to take affect.