Aastra Telecom SIP 480I - Manual (Page 59)

Overview
41-001129-00 Rev 09, Release 1.4.1 4-3
Configuring the IP Phones
Configuring the IP Phones Overview
An administrator can configure the IP Phone Network and SIP options from the
phone UI, from the Aastra Web UI, or the configuration files. Administrator level
options are password protected in both the IP phone UI and the Aastra Web UI.
The procedures in this section include configuring from the IP phone UI and the
Aastra Web UI. To configure the IP phones using the configuration files, see
Appendix A, “Configuration Parameters.”
To configure the phone using the IP phone UI, you must enter an administrator
password. To configure the phone using the Aastra Web UI, you must enter an
administrator user name and password.
References
For configuring the IP phone at the Asterisk IP PBX, see Appendix C,
“Configuring the IP Phone at the Asterisk IP PBX.”
For sample configuration files, see Appendix D, “Sample Configuration Files.”
These sample files include basic parameters required to register the IP phone at
the PBX.
Note: An administrator has the option of enabling and disabling the use
of password protection in the IP phone UI. This is configurable using the
configuration files only. For more information about this feature, see
Appendix A, the section
“Password Settings” on page A-8.
Note: In the IP phone UI, the default password is "22222". In the
Aastra Web UI, the default admin user name is "Admin" and the default
password is "22222".