Aastra Telecom SIP 480I - Manual (Page 441)

Sample Configuration Files
41-001129-00 Rev 09, Release 1.4.1 D-29
Sample Configuration Files
Appendix D 9112i Sample Configuration File
# Sample Configuration File
# =========================
# Date: October 26th, 2005
# Phone Model: 9112i
# Notes:
#
# The general format used here is similar to configuration files
# used by several UNIX-based programs. Any text following a number
# sign (#) is considered to be a comment, unless the number sign is
# contained within double-quotes ("#") where it is considered to be
# a pound. For Boolean fields, 0 = false, 1 = true.
# Comments:
#
# This file contains sample configurations for the "aastra.cfg" or
# ".cfg" file. The settings included here are examples only.
# You should change/comment the values to suit your requirements.
#
# Not all possible paramters are shown, refer to the admin guide for
# the full list of supported parameters, their defaults and valid
# ranges.
#
# The Aastra 480i, 480iCT, 9112i and 9133i phones will download 2
# configuration files from the TFTP server while restarting, the
# "aastra.cfg" file and the ".cfg" file. These two configuration
# files can be used to configure all of the settings of the phone with
# the exception of assigning a static IP address to a phone and line
# settings, which should only be set in the ".cfg" file.
#
# The "aastra.cfg" file configures the settings server wide, while the
# ".cfg" file configures only the phone with the MAC address for
# which the file is named (for example, "00085d0304f4.cfg"). The
# settings in the "aastra.cfg" file will be overridden by settings
# which also appear in the ".cfg" file.
#-------------------------------------------------------------------