Aastra Telecom SIP 480I - Manual (Page 125)

Operational Features
41-001129-00 Rev 09, Release 1.4.1 5-13
Operational Features
Operational Features • spre - Indicates the softkey or programmable key is set to automatically
activate specific services offered by the server. For example, if the spre value
of *82 is configured, then by pressing the softkey, *82 automatically activates
a service provided by the server. The value you enter for this field is
dependent on the services provided by the server.
• park- Indicates the softkey is set to be used as a park key to park an incoming
call. (For more information on park, see the section
Park Calls/Pick Up
Parked Calls on page 5-45 .)
• pickup - Indicates the softkey is set to be used as a pickup key to pick up a
parked call. (For more information on pickup, see the section
Park Calls/Pick
Up Parked Calls on page 5-45 .)
• lcr - Indicates the softkey is set to be used as a “last call return” key.
(For more information on lcr, see the section
Last Call Return (lcr) (Sylantro
Servers only) on page 5-58 .)
• empty (480i, 480i CT) - Indicates the softkey is configured to force a blank
entry on the IP phone display for a specific softkey. The soft keys are added
in order (from softkey1 to softkey20) after any hard-coded keys have been
added. If a particular soft key is not defined, it is ignored.
State-Based Softkeys (480i/480i CT only)
Users and administrators can configure a specific state to display when a softkey
is being used. Available states you can configure for each softkey include:
• idle - The phone is not being used.
• connected - The line currently being displayed is in an active call (or the call
is on hold)
• incoming - The phone is ringing.
• outgoing - The user is dialing a number, or the far-end is ringing.