Aastra Telecom SIP 480I - Manual (Page 389)

Softkey/Programmable Key Parameters
41-001129-00 Rev 09, Release 1.4.1 A-99
Configuration Parameters
Appendix A
Parameter –
softkeyN states
Idle, Connected, Incoming,
Outgoing
(in Web UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, .cfg
Description Displays the status of the phone when a softkey is pressed. You can
enter multiple values (idle, connected, incoming, outgoing) for the
"softkeyN state" parameter.
You must associate the softkeyN state parameter with a specific softkey.
In the following example, the softkeyN states parameter is associated
with softkey 12:
softkey12 type: speeddial
softkey12 label: voicemail
softkey12 value *89
softkey12 states: outgoing
Note: The IP phone idle screen condenses the softkeys. So in the
previous example, softkey 12 will appear in position 1 if no other softkeys
are set. A softkey type of "empty" does not display on the idle screen at
all.
Format Text
Default Value For softkey types - Line, DND, speeddial, BLF, BLF List, XML, lcr,
empty:
idle, connected, incoming, outgoing
For softkey type - Flash:
For softkey type - Park:
connected
For softkey type - Pickup:
idle, outgoing
Range Valid values are:
idle
The phone is not being used.
connected The line currently being displayed is
in an active call (or the call is on hold)
incoming The phone is ringing.
outgoing The user is dialing a number, or the
far-end is ringing.
Note: For softkey type, Pickup, values can be: idle, outgoing,
idle outgoing.
Example softkey1 states: idle incoming outgoing
softkey2 states: connected