Configuring the ip phones – Aastra Telecom SIP 480I User Manual
Page 83
Advanced Network Settings
41-001129-00 Rev 09, Release 1.4.1
4-27
Configuring the IP Phones
Configuring the IP Phones
.
Aastra Web UI
Step Action
1
Click on Advanced Settings->Network->Type of Service,DSCP
.
2
Choose a Protocol (SIP, RTP, and/or RTCP), and enter a value from 0 to 63.
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table
on
For more information, see the section
on
3
Click
to save your settings.
Note: The session prompts you to restart the IP phone to apply the configuration settings.
4
Select Operation->Reset and click
..
This manual is related to the following products: