Audio transmit and receive gain adjustments, Audio transmit and receive gain adjustments -116, Operational features – Aastra Telecom SIP 480I User Manual
Page 228
Operational Features
5-116
41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Operational Features
Audio Transmit and Receive Gain Adjustments
The audio gain properties for the IP phone handset, headset, and speakerphone is
adjusted to reduce side-tone and echo on the local and far-end equipment. You can
adjust these settings from -10 db to +10 db to best suit your comfort level and
deployment environment by using the following parameters in the configuration
files:
•
headset tx gain
•
headset sidetone gain
•
handset tx gain
•
handset sidetone gain
•
handsfree tx gain
•
audio mode
The default setting for these parameters is 0 (zero).
The following table describes each parameter.
Note:
Aastra Telecom recommends you leave the default of 0 (zero) as
the settings for these parameters.
Parameter
Description
Headset tx gain
The increased (+db) or decreased (-db) amount of signal transmitted from
the headset microphone to t he far-end party.
Headset sidetone gain
The increased (+db) or decreased (-db) amount of sidetone signal from the
headset microphone to the headset speaker.
Handset tx gain
The increased (+db) or decreased (-db) amount of signal transmitted from
the handset microphone to the far-end party.
Handset sidetone gain
The increased (+db) or decreased (-db) amount of sidetone signal from the
handset microphone to the handset speaker.
(continued)