Hard key parameters, Hard key, Parameters – Aastra Telecom SIP 480I User Manual
Page 380: Appendix a
Hard Key Parameters
A-90
41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Appendix A
Hard Key Parameters
This section provides the hard key settings you can use to enable and disable the
Redial, Conf, and Xfer keys on the IP phone.
Parameter –
redial disabled
Configuration Files
aastra.cfg,
Description
Enables or disables the Redial key on the IP phone. If this parameter is set
to 0, the key is active and can be pressed by the user. If this parameter is
set to 1, pressing the Redial key is ignored, and the dialed number is not
saved to the "Redial List".
Format
Boolean
Default Value
0 (false)
Range
0 (false), 1 (true)
Example
redial disabled: 1
Parameter –
conference disabled
Configuration Files
aastra.cfg,
Description
Enables or disables the Conf key on the IP phone. If this parameter is set
to 0, the key is active and can be pressed by the user. If this parameter is
set to 1, pressing the Conf key is ignored.
Format
Boolean
Default Value
0 (false)
Range
0 (false), 1 (true)
Example
conference disabled: 1