Aastra Telecom SIP 480I - Manual (Page 158)

Operational Features
5-46 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Operational Features
Park/Pickup Static Configuration (480i/480i CT only)
You can configure a static configuration for parking and picking up a call using
the Aastra Web UI at Basic Settings-> Preferences. By entering the appropriate
value in the "Park Call" and "Pickup Parked Call" fields, you tell the phone
where to park a live call and where to pickup the parked call.
On the IP phone UI, the static configuration method displays the following:
• When a call comes in, and you pickup the handset, the default label of "Park"
displays on the Phone UI.
• After pressing the "Park" softkey to park the call, the default label of
"Pickup" displays on the phone UI.
The values you enter in the Aastra Web UI for the Park/Pickup call feature are
dependant on your type of server. The following table provides the values you
enter for the "Park Call" and "Pickup Parked Call" fields in the Aastra Web UI.
Park/Pickup Call Server Configuration Values
*Leave "value" fields blank to disable the park and pickup feature.
Note: On the 480i CT handset, pressing Ï displays the "Park" and
"Pickup" labels.
Server Park Values* Pickup Values*
Aasterisk 700 700
Sylantro *98 *99
BroadWorks *68 *88
ININ PBX callpark pickup