Aastra Telecom SIP 480I - Manual (Page 196)

Operational Features
5-84 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Operational Features
Voicemail (480i/480i CT only)
The Voicemail feature on the 480i/480i CT IP phones allow you to configure lines
with phone numbers so the phone can dial out to connect to a voicemail server.
You associcate the Voicemail numbers with the phone numbers configured on
each line (1 - 9 lines).
For each assigned Voicemail number, there can be a minimum of 0 or a maximum
of 1 Voicemail access phone number.
The Voicemail list displays a list of phone numbers assigned to the 480i/480i CT
that have registered voicemail accounts associated with them.
The phone displays up to 99 voicemails for an account even if the number of
voicemails exceeds the limit.
Registered account numbers/URIs that exceed the length of the screen, either with
or without the voicemail icon and the message count, are truncated with an ellipse
character at the end of the number/URI string.
The end of the Voicemail list displays the number of new voicemail messages (if
any exist).
Configuring Voicemail (480i/480i CT only)
You configure Voicemail in the configuration files to dial a specific number to
access an existing voicemail account. The user then follows the voicemail
instructions for listening to voicemails.
To configure the Voicemail feature on the 480i/480i CT, you must enter the
following parameter in the configuration files:
• sip lineN vmail:
Note: The Voicemail list does not display the voicemail access number.
Note: The phone must have a registered voicemail account from a server
for this feature to be enabled. When no registered voicemail accounts are
registered to the phone, the display shows "List Empty".