Programmable key settings for 9112i and 9133i, Appendix a – Aastra Telecom SIP 480I User Manual
Page 390

Softkey/Programmable Key Parameters
A-100
41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Appendix A
Programmable Key Settings for 9112i and 9133i
The value of "N" for the following parameters is dependent on the number of programmable keys
available on the 9112i/9133i models. See the table on
for the applicable values.
Parameter –
prgkeyN type
Type
(in Web UI)
Aastra Web UI
Operation->Programmable Keys
Configuration Files aastra.cfg,
Description
The type of programmable key to configure. Valid types are:
•
line (9133i only) - Indicates softkey is configured for line use.
•
speeddial - Indicates programmable key is configured for speeddial
use
•
dnd - Indicates programmable key is configured for do not disturb
on the phone. This option is "do not disturb" in the Aastra Web UI).
•
blf (9133i only) - Indicates programmable key is configured for Busy
Lamp Field (BLF) use. User can dial out on a BLF configured key.
•
list (9133i only; Aastra Web UI only) - Indicates programmable key
is configured for BLF list use. User can dial out on a BLF List
configured key.
•
xml - Indicates programmable key is configured to accept an XML
application for accessing customized XML services. You can also
specify an XML softkey URL for this option.
•
flash - Indicates programmable key is set to generate a flash event
when it is pressed on the 9112i and 9133i.
•
The IP phone generates flash events only when a call is connected
and there is an active RTP stream (for example, when the call is not
on hold).
•
spre - Indicates programmable key is configured to automatically
activate specific services offered by the server. For example, if the
spre value of *82 is configured, then by pressing the softkey, *82
automatically activates a service provided by the server.
•
park - Indicates programmable key is configured to park incoming
calls when pressed.
•
pickup - Indicates programmable key is configured to pick up
parked calls when pressed.
•
lcr - Indicates programmable key is configured for “last call return”
when pressed.
Format
Text
Default Value
Not Applicable